15 LC32 Engine Crossmember Kits in stock and ready to ship.
The Crossmember Kit are $375.00 plus $40.00 shipping .
Please copy and send a PM or E-Mail with the information below and I will add your name to the list and I will call for your credit card information.
PM - Click on my User Name and select Private Message
E-Mail - leftcoast32@gmail.com
Product: LC32 Frame Crossmember Kit
Vehicle: (SSR or TBSS)
Name:
Billing/Shipping Address:
Phone Number:
The Crossmembers are for the SSR and TBSS. These will replace the existing Crossmembers under the oil pan. These are made with Chrome Moly Tubing, Laser Cut Plates and TIG Welded to keep the weight down and enhance strength.
Benefits
1) Will allow the use of a C6 Factory Rear Sump Oil Pan for the SSR and 2WD TBSS. (SSR's have some fitment issues with the C6 Oil Pan when using Kooks 1 7/8" headers. There seem to be two different batches, the most recent has a primary tube that is in the way of the oil pan. The primary tube will need to be moved over)
2) Lighter - Stock Crossmembers = 15 lbs - New Crossmembers = 12 lbs (12/15 reduced 4/5 = 80% of stock weight)
3) Will Make Service/Replacement Easier - Steering Rack, Transmission, Starter, Headers, Oil Pan.
4) Driving/Stability Benefits – Added strength and front suspension support at the lower frame.
5) Will allow the use of the Simple Engineering Stiffening/Skid Plate - Suspension / Frame
LC32 Frame Crossmember Kits
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
![Image]()
![Image]()
![Image]()
![Image]()
The Crossmember Kit are $375.00 plus $40.00 shipping .
Please copy and send a PM or E-Mail with the information below and I will add your name to the list and I will call for your credit card information.
PM - Click on my User Name and select Private Message
E-Mail - leftcoast32@gmail.com
Product: LC32 Frame Crossmember Kit
Vehicle: (SSR or TBSS)
Name:
Billing/Shipping Address:
Phone Number:
The Crossmembers are for the SSR and TBSS. These will replace the existing Crossmembers under the oil pan. These are made with Chrome Moly Tubing, Laser Cut Plates and TIG Welded to keep the weight down and enhance strength.
Benefits
1) Will allow the use of a C6 Factory Rear Sump Oil Pan for the SSR and 2WD TBSS. (SSR's have some fitment issues with the C6 Oil Pan when using Kooks 1 7/8" headers. There seem to be two different batches, the most recent has a primary tube that is in the way of the oil pan. The primary tube will need to be moved over)
2) Lighter - Stock Crossmembers = 15 lbs - New Crossmembers = 12 lbs (12/15 reduced 4/5 = 80% of stock weight)
3) Will Make Service/Replacement Easier - Steering Rack, Transmission, Starter, Headers, Oil Pan.
4) Driving/Stability Benefits – Added strength and front suspension support at the lower frame.
5) Will allow the use of the Simple Engineering Stiffening/Skid Plate - Suspension / Frame
LC32 Frame Crossmember Kits
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
Works quite well with the Modified 2wd pan (from Moroso), in addition to working with the C6 pan that Joe mentioned.
