Chevy Trailblazer SS Forum banner

1 - 15 of 15 Posts

·
Premium Member
2wd Turbo
Joined
·
11,126 Posts
Discussion Starter #1
What size Stall for a TBSS with a Maggie? LS7 TB, Catback and Efans are my mods.
2400 2800 3000 3200?
I dont want anything crazy this is a D.D. Anyone?
I will be donig tranny upgrades as well.

Thanks
Ross
 

·
Premium Member
06' TBSS 2WD
Joined
·
3,410 Posts
for a DD, and something that would compliment the off-idle power of the maggie, I would say a 2800 would be about perfect.
 

·
Administrator
Trailblazer SS
Joined
·
30,401 Posts
awd prob can do 2800-3000
 

·
Premium Member
2wd Turbo
Joined
·
11,126 Posts
Discussion Starter #9
Thanks guys! Thinking about a Phoenix 2800 now. Just have to get all my stuff in line!

Thanks
Ross
 

·
Premium Member
2007 AWD Red Jewel
Joined
·
1,713 Posts
I think a 4800 stall would be best :)

In all seriousness, 2600-2800 would do miracles for the 60 foot time on a maggie truck
 

·
Premium Member
07 AWD TBSS
Joined
·
4,581 Posts
If you take a 06 TBSS AWD that has had the stock heads done up, cam, pulley , headers,level V trans, CAI , ADM tune etc. He was running 13.65
before he installed his 3200 stall converter and it dropped him to a flat 13.02 ! If you take a guy that has a 06 AWD TBSS with a maggie and he is running a 13.35 with the maggie , efans, duals Etc . Add a 2800 stall converter , would you think it would drop him into the 12.6 to 12.7 range ?
 

·
Administrator
Trailblazer SS
Joined
·
30,401 Posts
I Have the 2wd 2600-2800 stall and woke up the maggie a lot. Just traction is a issue. On awd im sure that stall should knock him down into that range easy.
 

·
Premium Member
2007 TBSS
Joined
·
4,834 Posts
I would say 2600.

The maggie is so snappy that it will cause traction problems at the drop of a hat.
 

·
Banned
Joined
·
237 Posts
If you take a 06 TBSS AWD that has had the stock heads done up, cam, pulley , headers,level V trans, CAI , ADM tune etc. He was running 13.65
before he installed his 3200 stall converter and it dropped him to a flat 13.02 ! If you take a guy that has a 06 AWD TBSS with a maggie and he is running a 13.35 with the maggie , efans, duals Etc . Add a 2800 stall converter , would you think it would drop him into the 12.6 to 12.7 range ?
I ran a best of [email protected] with just a Maggie on my truck. I am still running the 3.0" pulley. With my new trans I am sure I will be in the mid 12's for sure.
 
1 - 15 of 15 Posts
Top