Chevy Trailblazer SS Forum banner
1 - 15 of 15 Posts

·
Registered
08 TBSS
Joined
·
679 Posts
Discussion Starter · #1 ·
Quick idle vehicle that just made me smile…if you’re having a bad day hope it makes you smile too!







Sent from my iPhone using Tapatalk
 
  • Like
Reactions: Mitch808

·
Registered
08 TBSS
Joined
·
679 Posts
Discussion Starter · #4 ·
What drop kit do you have??
Iirc it was Tony’s 30.5 kit…might be the 31.5 but pretty sure it’s the 30.5


Sent from my iPhone using Tapatalk
 

·
Registered
2008 TBSS Red Jewel RWD
Joined
·
963 Posts
Sounds stock to me LOL Glad to see it on all fours and running!!

Sent from my moto g play (2021) using Tapatalk
 
  • Like
Reactions: 2004RST

·
Super Moderator
TrailblazerSS
Joined
·
1,367 Posts
Did I miss the build thread? What's the motor specs? If you don't mind sharing.

Sent from my SM-G991U using Tapatalk
 

·
Registered
08 TBSS
Joined
·
679 Posts
Discussion Starter · #9 ·
Did I miss the build thread? What's the motor specs? If you don't mind sharing.

Sent from my SM-G991U using Tapatalk
I don’t remember if I ever did a full build thread but I’m the oem ls2 block opened to 4.010/4” k1 crank/6.125 k1 rods/ & wiseco -3 reverse dome pistons with a set of RHS hand ported ls3 heads and currently have a btr equalizer 3 until the home I’m building is done (with lin the next month or so)

Godfrey built trans all billet everything and fti4k stall with a term x system

When the house is done I’ve got a 2650 to put on it and with 100% e85 and proper injectors (have twin in tank 450’s) truck should make about 1300 or so at the back tires


Sent from my iPhone using Tapatalk
 

·
Super Moderator
TrailblazerSS
Joined
·
1,367 Posts
Holy hell, pls share some wall art.

Sent from my SM-G991U using Tapatalk
 

·
Registered
08 TBSS
Joined
·
679 Posts
Discussion Starter · #11 ·
Holy hell, pls share some wall art.

Sent from my SM-G991U using Tapatalk
Haha whatchu want


Sent from my iPhone using Tapatalk
 

·
Super Moderator
TrailblazerSS
Joined
·
1,367 Posts
Your gonna piss off that LS2 bottom end with a 2650.. Can't wait to see this build, my wallet will live vicariously through you my friend.

Sent from my SM-G991U using Tapatalk
 
  • Like
Reactions: 2004RST

·
Registered
08 TBSS
Joined
·
679 Posts
Discussion Starter · #14 ·
Your gonna piss off that LS2 bottom end with a 2650.. Can't wait to see this build, my wallet will live vicariously through you my friend.

Sent from my SM-G991U using Tapatalk
It’s not a stock bottom end lol it’s all forged and when it blows I’ll put them all onto an iron block or finally go to a dart or smx block…it’s gapped for plenty of cylinder pressure but worst case scenario I get to make me one of those nice living room engine block coffee tables


Sent from my iPhone using Tapatalk
 
1 - 15 of 15 Posts
Top