Chevy Trailblazer SS Forum banner
1 - 19 of 19 Posts

·
Registered
TrailblazerSS
Joined
·
22 Posts
Discussion Starter · #1 ·
I would like to know what you guys are seeing back to back, if possible with a stall swap.

If you can please post you converter stall speed, and diameter/ brand.

I think it would be good to have a thread full of different stall, brands, etc and the results as well

Thanks you
 

·
MOST HATED
Trailblazer SS
Joined
·
3,915 Posts
went from a 14.1(efans intake tune catback) to a 12.7 with the addition of a vig 3600/RPM trans and kooks headers.
 

·
Premium Member
Trailblazer SS
Joined
·
30,402 Posts
STOCK ON DRAG RADIALS LEFT Lane


adding yank ptb3600 stall high 12s
 

·
TT AWD TBSS Jeep
TT AWD SS Pwrd Jeep
Joined
·
5,825 Posts
Yank 3600 60' reduced by .3 to .4 depending on tires and .6 to .8 in the 1/4
If you have FI, you may see more, I have seen people with FI gain 1 to 1.2 in the 1/4 with a 3600-4000 stall. My Gn had a 4500 stall and when switching from 2800 I gained 1.2 in the 1/4. G/L with your purchase, Yank 4TW.

They have two differant 3600, regular and high efficiency. Read up on em.
 

·
Premium Member
TrailblazerSS
Joined
·
3,290 Posts
A broken tranny lol.....jk......didn't get times but I could tell a hell of a difference.......circle D 3200
 

·
Premium Member
TrailblazerSS
Joined
·
1,293 Posts
I pulled out the yank3600 in mine after I got it due to damage in the converter, but the previous owner of my truck said he was getting 13.0's all day after the converter swap.
I had a performance shop in town make me a small diameter 2800-3000 high efficiency converter that I run now. It's definitely slightly slower out of the hole, but man I pull like a raped ape up top where I was a turd before.
 

·
Premium Member
2007 AWD
Joined
·
4,748 Posts
You're still a turd!!!!


:burp:

Yes, going from stock to the Yank3600 was like night/brightsunnyday.
 

·
Premium Member
2007 AWD
Joined
·
4,748 Posts
Give a ninja a holler, depending on where you go, I might drive up to meet you and run the Krautmobile.
 

·
Premium Member
Trailblazer SS
Joined
·
30,402 Posts
i had A YANK ptb3200 and ptb3600 on my ss's and could not feel a difference driving at all with them in.

now the yank SSTB3600 very loose I wouldnt buy the converter. My wife drives the tbss with the ptb3600 stall 99 percent of the time and we live in san francisco where we have hills and all that and its no issue.

My yank ptb3600 was tigther than the vig3000 thats for sure and 60 foots 1.70-1.72 all motor.
 

·
Me>Matt
Joined
·
6,756 Posts
Ptb3600 drives just fine i DD my truck with one with no complaints.
I doubt a 3200 is gonna drop u 6tenths like a 3600 did for me when I actually had more weight in my truck after my stall then before
 
1 - 19 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top