[Jonzkri]

Hi new here and I have 2008 tbss. It's nice except for the hacked exhaust job it had on it by the last guy that owned it. Was wondering if anyone knows what universal tailpipe would work? I know the maganflow P/N#15003 did work but you can't get it anymore. I want stainless do to living in ct. And I don't want to buy cat back do to prices of them.

 

[ClintTBSS]

If you call Stainless Works he will get you one made. I have gotten a custom piece from them before and they already have the TBSS over axles measurements from the kits they make. Just let him know how long you need it in each direction.

 

[FlomaxSS]

Check out Flowmaster's universal tailpipe kit in 3.5" and 4". Jegs and summit stock them.

 

[Jonzkri]

Thanks I'll have to try stainless works. And will the 3.5" fit?

 

[fetchthecomfych]

4" fits no issues.

4" stainless possibilities:
https://www.jegs.com/i/Magnaflow/642/15397/10002/-1
https://www.jegs.com/i/Magnaflow/642/15455/10002/-1
A member here used the Ford pipe but said the straight section over the top had to be shortened, the Dodge one looks like it might avoid that.

3" stainless, I haven't found any similar pre-bent parts that can be repurposed. A universal kit of bends seems to be the cheapest way to do it even though you get more than twice as many bends as you really need. Buying just the two 45*s and a 90* and some straight, in 3" stainless, doesn't cost all that much less.
https://www.jegs.com/i/JEGS/555/30522/10002/-1
(fun fact: the aluminized version of the above is $50 more!)

 

[timg]

I used the Magnaflow 15397 for mine. It fits nicely IF you can do a bit of pipefitting (cutting and welding).

See here:
https://www.icloud.com/sharedalbum/#B0s5oqs3qlcyRU;481CF2F1-D58E-4E50-B49E-7DC5D2C44345
https://www.icloud.com/sharedalbum/#B0s5oqs3qlcyRU;1114435B-6196-4E5B-95B9-A85E8F871C7E
https://www.icloud.com/sharedalbum/#B0s5oqs3qlcyRU;828A8C02-ABBF-4A03-A270-02309B0CE03B
https://www.icloud.com/sharedalbum/#B0s5oqs3qlcyRU;01D85C0C-FD3A-4FF7-B8DB-BA6D3B0ADA45
https://www.icloud.com/sharedalbum/#B0s5oqs3qlcyRU;159DD371-10F2-464A-BE5F-2D7E8D79369E

I posted links to the rear muffler to give you some idea how little room there is in the back. You need to go straight into the muffler from the over-axle pipe.

Tim

 

[Mr_McSwayzee]

If you want to drive to PA I just pulled a Corsa stainles steel catback off mine. I'll give you a good price.

 

[ClintTBSS]

Thanks I'll have to try stainless works. And will the 3.5" fit?

I should have clarified. Stainless works can make it with any diameter pipe you need. They can apply the same bends to a 3" section if that's what you need.