Chevy Trailblazer SS Forum banner
1 - 20 of 32 Posts

· Premium Member
Trailblazer SS
Joined
·
28,997 Posts
Discussion Starter · #1 ·
well magnacharger is making a new tvs blower. Ive heard you wont be able to hear it whine but i think its good for 800 rwhp right?
 
G

·
Estimates are 900 at the crank right now. I should know more in a few months.
Put us on the list Joe when it does come out!:cheers1: Again, thanks soooooo much for all ya did this last weekend and everything with Maggie. You guys reading this that don't have Maggies yet but thinking of getting one. There should be no question who to buy it from(((( Left Coast 32(Joe)))))) has the best customer service I have ever delt with......EVER! Give him a call for that fact alone but is also a hell of guy all around!
 

· Registered
2006 TBSS
Joined
·
814 Posts
Estimates are 900 at the crank right now. I should know more in a few months.


I'm guessing this is very similar to the blower on the car behind the TBSS. If so I would be more than happy to post a few demo videos. There is a slight whine.. but its lower pitch..
 

· Registered
2006 TBSS
Joined
·
814 Posts
More advanced than a twin-screw? nice.
 

· Premium Member
Trailblazer SS
Joined
·
28,997 Posts
Discussion Starter · #17 ·
HERE goes a truck with the tvs set up.

http://www.undrprsr.com/index.php?option=com_content&task=view&id=44&Itemid=40


8-9 Psi on pump gas and 5000 pounds


MODS
  • '99 Chevy Silverado
  • All Wheel Drive transfer case
  • Stock 6.0L short block
  • Lingenfelter ported LQ4 heads (74cc) with Eaton light weight valves.
  • Comp cam XR265HR
  • Standard Magnuson kit with Prototype TVS R1860 supercharger running 8-9psi.
  • Stock throttlebody
  • Dytnatech headers with Corsa exhaust
  • 4.10 gears Eaton E-locker in the front, Eaton Limited-Slip in the rear
  • Transmission: Mega Raptor from PATC 4L60E
  • No Methanol injection
  • No N2O
  • 5000 lbs. curb weight
  • 60-foots in 1.5 - 1.6 seconds!
more vids of it you cant even hear the blower
http://www.undrprsr.com/index.php?option=com_content&task=view&id=47&Itemid=1

http://www.undrprsr.com/index.php?option=com_content&task=view&id=48&Itemid=1
 

· Premium Member
Joined
·
8,514 Posts
I turn my back for a second and all the information gets put out there. The 1900 will be capable of around 900 HP at the crank so figure what it will do on say the forged bottom end I have and L92 Heads with a good cam. Hmmmmmmmmmmm
 

· Premium Member
Trailblazer SS
Joined
·
28,997 Posts
Discussion Starter · #20 ·
408 , l92 heads and nice cam i bet you 700 on pump gas easy with like 8 psi
 
1 - 20 of 32 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top