[cjtbss07]

hey guys i changed out my stock thermo and put a 160 stat just about 2-3 weeks ago. i thought it was working fine. showed better temp after install. but i seen that last nite i was leaking and REAL low on coolant.(EMpty)so i added water for now but right this minute still leaking. so im guessing when ever i changed my thermo its been leaking. any body have suggestions. i think its probably the gasket or didnt tightened it enough. help me out yall. what do yall think?

 

[cmb570]

my guess would be the gasket or you didnt properly seat the bottom hose when you drained it. I would check to see if coolant is dripping from front support or front of engine. That should tell all

 

[cjtbss07]

my guess would be the gasket or you didnt properly seat the bottom hose when you drained it. I would check to see if coolant is dripping from front support or front of engine. That should tell all

its leaking from the bottom of the housing. the front support yes right where the 2 bolt housing is at

 

[cjtbss07]

its leaking from the bottom of the housing. the front support yes right where the 2 bolt housing is at

Thanks got it fixed