[KWB]

This was recently posted over on the SSR Forums (for those that want more bling): Finned Differential Covers

 

[Blazen]

very nice...

 

[lt1z]

I have always been partial to these. The look good....not you you can see it anyway with the spare tire in place.....and actually serve a purpose by preloading the the rear. I have used one with good results on the 12 bolt in my Camaro.

http://www.taperformance.com/rearend.htm

 

[Left Coast '32]

I just dont know if the T/A cover will clear the rear panhard bar. You may just need to have a custom bar bent to clear it.

 

[Guest]

I dunno about those. The fins may add some extra cooling, but it looks like they reduce the amount of oil it can actually hold, kinda making the fins pointless.

 

[lt1z]

I just dont know if the T/A cover will clear the rear panhard bar. You may just need to have a custom bar bent to clear it.

I'm not sure if it will. I know the T/A cover on the 12 bolt in my Z28....the lock nut and preload screws barely clear the panhard bar(tubular)

 

[highpressure]

the polished cover looks nice!

 

[Evil SS 2006]

I like the black with machined fins...

 

[SLOW MO]

I have always been partial to these. The look good....not you you can see it anyway with the spare tire in place.....and actually serve a purpose by preloading the the rear. I have used one with good results on the 12 bolt in my Camaro.

http://www.taperformance.com/rearend.htm

I swear by those covers.If it wasn't for the ta cover i had my 10 bolt would have died along time ago in my camaro.I got one on my Dana 60 now.