Chevy Trailblazer SS Forum banner

Fast Fill For New Torque Converter

4565 Views 12 Replies 9 Participants Last post by  NORCAL SS
Many of you know filling a new torque converter takes time even if you spin it well tonight found out a fast way of doing it.

They give you that rubber cover that stops anything entering the conveter in shipping. Well just pour the fluid in and put that cover on top and push up and down a few times and it forces it into the torque conveter fast. Dont know why i didnt do this earlier. Just a heads up
1 - 1 of 13 Posts
all you need to do is put a quart or so in and go. The main concern and what I have seen some do is not get the converter all the way in and tear up the pump. That's a bigger problem IMHO. But never, never do a dry one.
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.