Chevy Trailblazer SS Forum banner
1 - 18 of 18 Posts

·
Registered
TrailblazerSS 2006
Joined
·
55 Posts
Discussion Starter · #4 ·
That's my problem.
I bought engine wiring harness for E67. I do not knewn what I need for E40.
Maybe I just need E67? What else do I need for TBSS 06 to go to E67?
 

·
Premium Member
2008 TB SS AWD 3SS
Joined
·
3,288 Posts
06 TBSS with E40 have a 24x crank/1x cam reluctor setup. If you want to go with 07-09 TBSS with E67, these engines have 58x crank/4x cam reluctor. If your engine is 24x/1x now, you can either buy the E40 harness OR have the reclutor on the crank changed for a 58x version and buy the 4x cam gear.

Is this for a swap, I see a regular S10 style Blazer in your profile? You can use a regular 5.3 TB harness from 03-04 that use the LS1B/P59 PCM or the 05-06 TB 5.3 harness is similar (likely identical) to the 06 TBSS.
 

·
Registered
TrailblazerSS 2006
Joined
·
55 Posts
Discussion Starter · #7 · (Edited)
06 TBSS with E40 have a 24x crank/1x cam reluctor setup. If you want to go with 07-09 TBSS with E67, these engines have 58x crank/4x cam reluctor. If your engine is 24x/1x now, you can either buy the E40 harness OR have the reclutor on the crank changed for a 58x version and buy the 4x cam gear.

Is this for a swap, I see a regular S10 style Blazer in your profile? You can use a regular 5.3 TB harness from 03-04 that use the LS1B/P59 PCM or the 05-06 TB 5.3 harness is similar (likely identical) to the 06 TBSS.

I have got a 06 TBSS. Photo S10 Blazer this is my old car.Engine wiring harness for E67 bought by mistake for TRAILBLAZER SS (2WD) - 2006 .
 
1 - 18 of 18 Posts
Top